News

As the total power inlet of the entire low-voltage power distribution system, it is the primary protection gateway for the entire station's power distribution. Failures will affect the entire low-voltage system, so reliability is the top priority. It is necessary to strictly distinguish the logic of incoming line, bus tie, and outgoing line to prevent incorrect paralleling and incorrect power transmission. Meet the system insulation coordination requirements; the rated insulation voltage, power frequency withstand voltage, and phase-to-phase/phase-to-ground safety distances must comply with regulations to prevent creepage, breakdown, and phase-to-phase short circuits.

Epoxy resin dry-type transformer is a kind of transformer. Epoxy resin dry-type transformers use epoxy resin as the insulating material. The high and low voltage windings are wound with copper tape (foil), and epoxy resin is poured and solidified in a vacuum to form a high-strength fiberglass structure. The insulation grades are F and H. Epoxy resin dry-type transformers have the characteristics of good electrical performance, strong lightning impact resistance, strong short-circuit resistance, small size and light weight. A temperature display controller can be installed to display and control the operating temperature of the transformer winding to ensure the normal service life of the transformer.

Low-voltage switchgear is the core equipment in modern power supply and distribution systems, mainly used for power distribution, circuit control, overload protection, short-circuit protection, earth leakage protection and power monitoring. It is widely applied in factories, buildings, data centers, hospitals, shopping malls, municipal engineering and other fields. Featuring compact structure, high safety and reliability, convenient maintenance and high intelligence, it is the key equipment to ensure stable operation of power systems. This article fully introduces the core technical points of low-voltage switchgear in terms of structure, parameters, performance, selection and application.

Power transformers are the core equipment in the power grid system, and their safe and stable operation is directly related to the reliability and economy of the entire power system. With the continuous expansion of the power grid and the improvement of intelligent levels, traditional passive relay protection can no longer fully meet the requirements for transformer safe operation in modern power systems. Therefore, active protection and safe operation strategies are receiving increasing attention and have become an important direction for ensuring the long-term reliable operation of transformers.

Transformer oil (also known as insulating oil) is a key component in oil-immersed transformers, primarily serving three functions: insulation, cooling, and arc suppression. During transformer operation, it effectively isolates live components to prevent short circuits, dissipates heat through convection to maintain stable equipment temperature, and absorbs gases generated by arcing or partial discharges within the transformer, protecting the core and windings.

Transformers are indispensable equipment in power systems, serving to convert voltage levels to meet the requirements of various electrical devices.During transformer operation, load loss is a critical performance indicator that directly affects both the transformer's efficiency and operating costs.