Miniature Isolating Circuit Breaker

Ceho is Leading Miniature Isolating Circuit Breaker manufacturer. This type of circuit breaker is an automatically operating electrical switch used to prevent overcurrent damage to the circuit. Iy will trip in the event of a short circuit or overload to protect equipment from faults or electrical damage. When the current exceeds a set value, it will automatically cut off the current to prevent damage to the circuit due to potential fire hazards. Rated currents are: 1A, 5A, 2A, 10A, 16A, 25A, 20A, 32A, 50A, 40A, and 63A. The service life of the product depends primarily on various factors, such as the severity and frequency of tripping, equipment quality, and environmental conditions. Typically, with proper use and maintenance, these devices can last for decades.

Technical Data

Applications

From the basic purpose of use, in fact, the core function of Miniature Isolating Circuit Breaker is to protect the circuit.To elaborate, we can divide the following directions:

1. Overload and overcurrent protection: that is, it can protect the circuit from overload damage. When the current exceeds the rated capacity of the MCB, it trips and cuts off the current to prevent further damage.

2. Short circuit protection: MCB can prevent short circuit, when there is a low resistance connection between the two conductors, it will detect the sudden surge of current and trip, prevent overheating and fire hazards.

3. Ground fault protection: If you need it, you can ask us to equip your custom Miniature Isolating Circuit Breaker with ground fault protection function to detect leakage. Protection against electric shock and insulation failure is important for safety.

4. Selective coordination: MCB can be used in conjunction with other protective devices, so that the device closest to the fault point can be disconnected first, minimizing downtime and damage.

5. Remote Control: With Ceho's advanced design, our products feature remote control capabilities that make it easier to monitor and control circuits in industrial or commercial environments.